Dipstar : Comment ca marche et c'est quoi ?

[LoneWolf meta]

Boujour tous le monde,

 

Alors voilà je suis nouveau sur la scène NDS, j'ai fait très récemment l'acquisition d'un M3 Perfect SD. (Merci metashop ^^)

 

Je viens de faire une recherche sur le forum mais j'ai rien trouvé sur l'utilisation de "DIPSTAR" et ses fonctions.

 

Alors c'est pour ça que j'ouvre ce topic afin de réunir toutes les infos possible et d'appendre à s'en servir en vue de faire un tuto.

 

Je suis sûr que pas mal de monde serait interressé alors si vous avez des infos n'hésité pas.

 

J'espère que grace à votre aide je vais pouvoir m'en servir et en apprendre un peu plus le cheat DS.

 

Merci d'avance à ceux qui repondront et à bientot ...

[RídLëY]

Je suis également interessé. J'ai trouvé ce programme mais je sais pas du tout comment il marche.

 

Merci pour votre aide:jap:

[LoneWolf meta]

Je viens de trouver un petit tuto pour l'utilisation de dipstar sur M3 ca tombe bien c'est le même linker que moi.

 

1. Download the DipStar complete package from the M3 / 3rd Party download section

2. Copy dipstar.ds.gba to your CF or SD card

3. Copy the downloaded dipstar.ds.dat from the cheats exchange to subdirectory "GAMESAVE"

4. Make sure your DS rom is already patched to work with DipStar. To do that, drag&drop the ROM from the memory card onto m3dip.exe. Also note that by doing this the game will need DipStar preloaded in order to run, even if you don't want to enable cheats.

5. Put the card into the M3 and turn on the DS

6. Select "dipstar.ds.gba" and press A (nothing will happen apart from a short blink)

7. Choose the DS game you want to cheat and press A

8. Press A again and _quickly_ press and hold the button for the cheat you want to activate. Hold the button until the game has loaded.

 

Je poursuis mes recherche et sa avance

 

Voici le mécanisme de dipstar :

 

 

PS: Si une bonne Âme se sent capable de traduire...

[LoneWolf meta]

How to use : In case of M3-PerFect

 

*** I could have used only M3-CF ***

*** M3-SD has a bug? It wasn't possible to have used ***

 

---> Les boules j'ai un M3 SD mais jvé tester quand même !

 

1)Writes DipStar

Write "dipstar.ds.gba" on to the memory card.

Use M3 game manager. (Use [Write GBA] mode).

makes a SAVEFILE(dipstar.ds.dat) in the GAMESAVE folder.

 

2)Triming the dipstar.ds.dat(1024KB->129KB)

M3 game manager creates a 1024 kilobyte savedata file.

But, it is enough at 129 kilobytes.

Download : M3-Saveman2 v140 english here

1.Select memorycard and EditMode:GBA.

2.Presses the [Convert NDS1024KB->257KB GBA1024KB->129KB] button.

>&gtThe filesize decreases in this and the start-up becomes fast.

 

3)Boot DipStar(CODE EDITOR)

1.Start the M3-PerFect.

2.Chooses a GameMenu.

3.Chooses "dipstar.ds.gba" and presses the A button.

4.Chooses NDSROM and presses the A button.

5.Continues to press the L button while loading.

>&gtThe code editor starts up in this. Input the cheat-code.

 

4)Boot DipStar(CHEAT MODE)

1.Start the M3-PerFect.

2.Chooses a GameMenu.

3.Chooses "dipstar.ds.gba" and presses the A button.

4.Chooses NDSROM and presses the A button.

5.Continues to press the

A or B or SEL or STA or RIGHT

or LEFT or UP , DOWN button while loading.

>&gtThe code of the slot of the code editor is executed.

 

== Warning ==

Please check a [CHEAT CODE] option in M3 game manager.

DipStar doesn't start up if meeting and not being.

(You may use m3dip.exe).

 

 

D'autre infos vont venir si ca vous interesse ...

[LoneWolf meta]

English manual of dipstar :

 

<-Project DipStar- document>

 

"-Project DipStar-" is cheat-tool for NintendoDS.

The one such as GameShark and ProActionReplay.

(But,My release was earlier.)

 

********** Don't use in WFC or NetWork. **********

********** The fellow who can not keep a promise is garbage. **********

********** This program has WiFi detection feature. **********

 

 

@The necessary one

1.GBA FLASH CART(EZ-FLASH,XG,USBLine,etc..** Please "Not use loader" **)

2.PassMe(M3/G6 PassKey,PassKey2,MAGICKEY MK2/MK3,etc..)

3.NintendoDS(FW1~FW3) or NintendoDS(FW4/FlashMe)

 

@This cannot be used.

1.G6adaptor,SuperCard (Loader is obstructive)

2.SPRITEKEY,SUPERPASS,EZ-PASS,PassMe2

3.NintendoDS(FW4/No FlashMe)

 

@How to use : In case of the general FLASHCART (for example:EZ-FLASH)

1.Please write dipstar.ds.gba in GBA-FLASHCART. ** Plz! "Not use loader" **

2.Please write dipstar.ds.sav in FLASHCART-SRAM area.

3.Please set PassMe+DSGAME and GBA-FLASHCART in NintendoDS.

4.Presses the any button with Nintendo LOGO.

 

@Possible to use MS-PerFect?

Yes, supported formally in Firmware 19(E19/J19 etc..)~.

1.Writes "dipstar.ds.gba" in the CF/SD memory card (Use M3game manager).

2.transfers NDSROM to the memory card(use M3game manager).

3.Boot M3-PerFect.

4.Set a cursor to dipstar from the game menu of M3 and press the A button.

5.Moreover, set a cursor to NDSROM and press the A button.

6.Presses the any button with the load screen.

 

@The button and the effect

 

<CODE EDITOR MODE>

Please start while pushing [L button].

The operation method is written on the screen.

 

<CHEAT MODE>

Please start while pushing ..

[A, B, START, SELECT, RIGHT, LEFT, UP and the DOWN button].

These buttons are the same as <CODE EDITOR MODE>.

 

R button = "SLOT UP&DOWN(7&8) compare mode.

Details are written later.

 

Possible to use "Ultra fast mode" only for M3-PerFect.

Should continue to press the "R button"

with the A, B, START, SELECT, LEFT, UP, DOWN button.

(SlotA:A+R SlotLEFT:LEFT+R etc..)

In this, the boot-time becomes 1/4 (8sec->2sec!)

 

@Where is the code?

sub folder \manual\cheatcode.htm or

http://hp.vector.co.jp/authors/VA018359/nds/cheatcode.htm

or Wiki(Soryy,Japanese only).

http://dipstar.wikiwikiweb.jp/

 

@How to search

1.Use disassembler : http://hp.vector.co.jp/authors/VA018359/ndsdis/

2.Use search-tool : sub folder \hasteDS\hasteds.exe & Emulator(iDeaS or DeSmuME)

3.Read documents : http://hp.vector.co.jp/authors/VA018359/nds/dip_top.htm

(Sorry,Japanese only)

 

@Code format

<Normal code(not use MASTERCODE)>

0XXXXXXX 000000YY .. 8bit write it only once.

 

1XXXXXXX 0000YYYY .. 16bit write it only once.

 

2XXXXXXX YYYYYYYY .. 32bit write it only once.

 

AXXXXXXX YYYYYYYY .. 32bit write it only once.

 

<Extra code(use MASTERCODE)>

FXXXXXXX YYYYYYYY .. Master Code(Interrupt address & Original data)

 

0XXXXXXX 000000YY .. 8bit write it always

 

1XXXXXXX 0000YYYY .. 16bit write it always

 

2XXXXXXX YYYYYYYY .. 32bit write it always

 

AXXXXXXX YYYYYYYY .. 32bit write it only once.

 

301000YY XXXXXXXX .. 8bit Increment

302000YY XXXXXXXX .. 8bit Decrement

3030YYYY XXXXXXXX .. 16bit Increment

3040YYYY XXXXXXXX .. 16bit Decrement

30500000 XXXXXXXX .. 32bit Increment

YYYYYYYY 00000000

30600000 XXXXXXXX .. 32bit Decrement

YYYYYYYY 00000000

 

4XXXXXXX YYYYYYYY .. Repert write

W000ZZZZ UUUUUUUU

->W .. (0=8bit write / 1=16bit write / 2=32bit write)

ZZZZ .. Loop count

UUUUUUUU .. Step width

 

5XXXXXXX YYYYZZZZ .. Memory dump to SRAM(and STOP).

->XXXXXXX .. Address

YYYY .. Size(FFFF=64KB but crash. Recommendation:MAX4000h)

ZZZZ .. SRAM address(Recommendation:2C10h = SLOT DOWN[8])

 

BXXXXXXX YYYYYYYY .. Parameter search(Result save to SRAM).

ZZZZZZZZ V000WWWW

->XXXXXXX .. Start Address

YYYYYYYY .. End Address

ZZZZZZZZ .. Search Param

V000 .. V=0.BYTE / 1.HALFWORD / 2.WORD

WWWW .. SRAM address(Recommendation:2810h & 2C10h = SLOT UP[7] & DOWN[8])

 

===>Use CODE EDITOR-Compare mode (R button)

if SLOT UP(7) = 02019D00 02028000 02190000 025FF000 00000000 and

if SLOT DOWN(8) = 0200159C 02099000 02028000 00000000

->Result = 02028000 .. get target address!

 

EXXXXXXX 000000YY .. if(addr XXXXXXX==8bit YY) execute:NextCode

EXXXXXXX 1000YYYY .. if(addr XXXXXXX==16bit YYYY) execute:NextCode

DXXXXXXX YYYYYYYY .. if(addr XXXXXXX==32bit YYYYYYYY) execute:NextCode

 

C0000000 XXXXXXXX .. Resident address change(Default=0x0237f800)

(When the default doesn't boot, you should use "C0000000 023FF000" ?)

 

C1000000 X0000YYY .. if(KeyInput=YYY) execute:NextCode

X .. (0=BitMaskON / 1=BitMaskOFF)

MASK immova L R DW UP LF RG ST SL B A

X=0 000000 0 0 0 0 0 0 0 0 0 0 .. top=0/bottom=1 A=00000001

X=1 000000 1 1 1 1 1 1 1 1 1 1 .. top=1/bottom=0 A=100003FE

 

Vous pouvez vous procurer dipstar ICI

[Invité bitonio6]

si vous commenciez pas nous expliquer de quoi il s'agit comme soft?

[RídLëY]

DipStar permet d'utiliser des codes Action Replay avec un linker.

 

Mais moi j'ai pas de M3

 

LoneWolf, rien compris a ton dernier post:fou:

[Zanpakuto]

Arf rien compris :/

Autant utiliser un trainer

[RídLëY]

Je t'ai MP Zanpakuto:wahou:

[LoneWolf meta]

Pour l'instant je vous mets les infos brute comme je les trouve je commence à capter le système je vais tester voir ce que sa donne si j'y arrive je vous pond un beau tuto

 

Keylogger --> le M3 n'est pas nécessaire à l'utilisation de dipstar, il y a d'autre linker compatible. Je me suis focalisé sur celui là car j'ai le même ...

La méthode doit être sensiblement la même avec les linker compatible

 

PS: Je vais tâcher de le faire tourner et de vous faire un tuto car on en parle nulle part sur le forum, je pense que ca va être utile aux cheaters comme moi ^^

 

Forum officiel : http://forum.gbadev.org/viewtopic.php?t=8662&postdays=0&postorder=asc&start=0

 

NDS Cheat-tool [Project-DipStar-]