Aller au contenu

[TOPIC UNIQUE] Xtreme firmware 4.2A and 4.2B for TS-H943 Xbox 360


DarthVad3r

Messages recommandés

Salut @ tous les possesseurs de lecteur Samsung

Le firmware 4.2 est sorti hier

 

------------------------------------------------------

Xtreme firmware 4.2A and 4.2B for TS-H943 Xbox 360

------------------------------------------------------

 

FirmGuard, Dual Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!

 

 

 

 

Features

-----------------

 

(v4.2) Security Sector read order now based on actual PFI from disk resulting in faster better booting for backups.

 

 

(v4.1) Improved FirmGuard.

(v4.0) MS28 core firmware. Also better and faster media detection.

(v4.0) FirmGuard added. On by default. Firmware cannot be Read/Written by 360 console. Can ONLY be turned off (Read/Write enabled) via Enable0800 mode.

(v4.0) 4.0A firmware. 4.0A is default Fast Read Speed mode. Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.

(v4.0) 4.0B firmware. 4.0B is default Quiet/Slow Read Speed mode. Fast Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.

 

(v3.3) Dual Read Speed mode (Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.)

(v3.2) Improved Media speed patch, forced full speed on all media types!

(v3.1) Added Booktype overwrite patch (bitsetting to Dvdrom no longer required)

(v3.1) Added Media speed patch (drive treats backup disc speed rating same as original)

(v3.1) Fixed DVD Movie backup/Xbox 1 backup read bug.

(v3.0) Stealth Media implemeted into firmware. Backups now appear exactly as original disk regardless of which disk check command used by Xbox 360

(v3.0) Enable0800 mode supports extraction of raw PFI (Physical Format Information) and raw DMI (Disk Manufacturing Information)

(v3.0) Support for loading of extracted PFI and DMI from disk

(v3.0) Non-Stealth Backups automatically enhanced with embeded PFI for Xbox 360 and Xbox 1

(v3.0) Included new Video.iso for Xbox 360 and Xbox 1 backups, now the same as originals

(v3.0) Security placeholders/bad sectors for 360 backups are outside both valid psn ranges so they cannot be read/checked by 360 host

(v2.0) Extraction part of firmware enabled with Enable0800 DVD. ISO included.

(v2.0) In Enable0800 mode, allows drive to function natively under Windows without any hardware conversion/adaptors

(v1.0) Boots all Xtreme Xbox 360 backups

(v1.0) Boots all Xtreme Xbox 1 backups

(v1.0) Boots all Xbox 360 originals

(v1.0) Boots all Xbox 1 originals on Xbox 360

 

Use on Xbox Live at own risk

 

Technical details

------------------------

 

Security sectors are read in this order:

 

Only if disc is type DVD-Rom read Xbox 360 security sector from PSN FD021E and above(Layer 1)

Otherwise read Xbox 360 security sector from PSN 04FB1F (Layer 0)

then check for Enable0800 security sector from PSN 04FB1F (Layer 0)

then read Xbox 1 security sector from PSN 605FF (Layer 0)

Samsung Xtreme firmware was always immune to the EA dummy SS on original. This makes it faster and more reliable for SS reads.

No more attempted read/seeks of SS from FD021E and above for backups!

Hitachi will need to be updated to a similar routine!

 

 

FOr Xtreme 4.2A default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.

 

FOr Xtreme 4.2B default backup Read Speed is Quiet/Slow 2-4x. When Original Game disk is booted, all subsequent backup loading will be at Fast Read mode 12x, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed for backups (2-4x).

 

FirmGuard disables reading/writing of drive firmware. This is always on. Can only be turned off via Enable0800 mode. Do not have SATA cable plugged into Xbox 360 console when in Enable0800 mode.

 

Backups now automatically have pre-locked PSN range same as stated in extracted PFI sector if exists, or embeded PFI, therefore cannot read extracted SS/PFI/DMI sectors from disk. Currently all original 360 games have same PFI sector but maybe not in future, hence new feature of extracting PFI in Enable0800 mode and read from backup at PSN $4fb1d (Xbox 360) and $605fd (Xbox1) or if these sectors are blank embeded PFI will be used

 

Backups now support loading of DMI sector. This sector is different for every original 360 game but is currently not checked for, but maybe in future hence DMI can now be extracted also in Enable0800 mode and read from backup at PSN $4fb1e (Xbox 360) and $605fe (Xbox1)

 

Firmware checks for Enable0800 security sector @ PSN 04FB1F and if found, enables 0800 mode of firmware.

 

ISO image Enable0800.iso included. Just burn and insert into drive when you wish to extract security sectors or dump games.

 

0800 mode of firmware deactivated by inserting game backup (Xbox 360 or Xbox 1) or DVD movie or turning off console.

Reads Xbox 360/Xbox 1 security sector from PSN FD021E (Layer 1)

Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)

Reads Xbox 1 security sector from PSN 605FF (Layer 0)

Security sector must be extracted using Enable0800 DVD for Xbox360 games and Xbox 1 games

 

 

Flashing your drive

---------------------------

 

For ms28 firmware versions of drive you will need to use the Vcc method or the VIA SATA 10 sec method to read/write flash. Refer to http://forums.xbox-scene.com/index.php?showtopic=535222

 

Advisable to make a backup of your dvd drive firmware first.("mtkflash r /m orig.bin")

 

In Windows, copy orig.bin to same directory as this release (same directory as xtrem42a.bin/Xtreme42b.bin and X360SAM.exe)

 

Double click "Make X42a.bin" or "Make X42b.bin" to create x42a.bin (Xtreme4.2A firmware with your key from orig.bin) or x42b.bin (Xtreme4.2B firmware with your key from orig.bin). Thanks to eXOBeX for X360SAM.EXE

 

Copy x42a.bin or x42b.bin to boot disk

 

Power off PC

 

Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360

Power on Xbox 360

Power on PC

Boot with standard dos boot disk with included mtkflash utility

 

Run "mtkflash w /m x42a.bin" or "mtkflash w /m x42b.bin"

 

 

 

Flashing your drive with Xtreme4.0/4.1 firmware installed

----------------------------------------------------------

 

Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360

 

Power on PC

 

Boot with standard dos boot disk with included mtkflash utility to dos

 

Power on Xbox 360

 

Insert Enable0800 disc into drive and wait 10 seconds then eject disc

 

Run mtkflash as per normal.

 

 

Creating a game backup (Recommended way)

------------------------------------------

 

Use either Schtrom360XtractV3.0 or later

 

or

 

Xbox Backup Creator v2.2 or later

 

 

 

 

 

*****************************************************

*****************************************************

*****************************************************

*****************************************************

 

----------------------------------------

Legacy information for creating backups.

----------------------------------------

 

 

Extracting Security Sector

---------------------------------------

 

Ensue SATA cable is plugged from drive to PC.

(This is very important as may be possible in future for console to detect modified firmware due to Inquiry routine enabled for Windows)

 

Power on Xbox 360.

Insert Enable0800 DVD into drive. Wait 5 or so seconds then remove the Enable0800 DVD. Drive now in 0800 mode.

Turn on PC and wait for Windows to boot

Insert original game disk into drive and wait for windows to detect disk change

Run DVDinfoPro

Enter the following four custom cdb commands:

 

AD 00 FF 02 FD FF FE 00 08 00 01 C0

AD 00 FF 02 FD FF FE 00 08 00 03 C0

AD 00 FF 02 FD FF FE 00 08 00 05 C0

AD 00 FF 02 FD FF FE 00 08 00 07 C0

 

Then save hexadecimal display as bin file as SS.bin

 

Extracting PFI (Physical Format Information) Sector

-------------------------------------------------------------------

Run DVDinfoPro

From Advanced Commands pull down menu choose Send Custom Command

From Preset Commands pull down menu choose "00h Physical Format Information" from under the Read DVD Struct Commands heading

Click Send

Then save hexadecimal display as bin file as PFI.bin

 

Extracting DMI (Disk Manufacturing Information) Sector

-------------------------------------------------------------------

Run DVDinfoPro

From Advanced Commands pull down menu choose "04h Disc Manufacturing Info"

Click OK on Read DVD Structure Option window

Then save hexadecimal display as bin file as DMI.bin

 

 

 

Creating a game backup

-----------------------------------

Drive is still in 0800 mode.

Extract Isobuilder.rar

Insert original game disk into drive and wait for windows to detect disk change

Run DVDinfoPro

Enter the following custom cdb command to unlock drive: (game data visable)

 

FF 08 01 01 05 01 03 00 04 07 (new in MS28)

 

Run Isobuster

Right click on DVD and select Extract From-To

Click Length and enter number of LBAs as follows:

 

Xbox 1 Original Number of LBA to read 3431264 decimal

or

Xbox 360 Original Number of LBA to read 3567872 decimal

Select User Data (2048 bytes/block)

Click Start Extraction

Enter filename as game.iso and click Save

Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors

Copy game.iso, ss.bin, PFI.bin and DMI.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)

Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game).

These batch files now expect PFI and DMI bin files

Burn with CloneCd and choose the image.dvd file

 

Turning off 0800 mode of firmware

------------------------------------------------

 

Either insert game backup (Xbox 360 or Xbox 1) or DVD movie. This de-activates 0800 part of firmware or turn off console.

 

 

Pour toute question a propos de ce firmware, merci de les poser ici

 

Edit :

Pour ceux qui ont flasher leur lecteur avec la 4.0 ou la 4.1 il faut passer le lecteur en mode 0800 avant de lancer mtkflash. Pour faire cela il faut graver l'iso enable0800.iso avec clone cd sur un DVD+R DL (j'ai essayé un CD-R, un DVD+R ca ne marche pas)

 

Edit #2 :

Je vous met un lien vers le tuto fait par gégé qui explique comment flasher un lecteur en 3.2 (la procedure reste la meme pour le firm 4.2, ya juste les noms qui changent)

http://metajean34.free.fr/44/pages/xbox44pag.html

 

Merci a stseiya pour la news

 

DarthVad3r

Lien vers le commentaire
Partager sur d’autres sites

@ZeroDegre

oki j'y penserais la prochaine fois :jap:

Mais c'etait pour eviter de se retrouver avec un topic qui fasse 3km de long et qui parle de differentes version du firmware

 

et c quoi au juste sa nouvelle fonctionnalité ?

 

Un renforcement du firmguard (interdire la lecture/ecriture du firmware par la console)

Lien vers le commentaire
Partager sur d’autres sites

D'accord avec ZeroDegre.

Ne jamais critiquer ce qu'on nous propose venant de volontariat .

 

Moi ca me faisait penser un peu aux serveurs Counter Strike gratuit, mais que beaucoups critiquaient car ça "laggauait" un peu, et puis c'est devenu payant à force de critique (payant pour avoir des serveurs plus costauds, mais payant quand meme! )

Lien vers le commentaire
Partager sur d’autres sites

Vous etes chiants, j'ai flashé il y a quelques jours mon firmware en 4.0A !

 

MDR!!

 

Merci pour l'info.

 

moi je lé flasher aujourd'hui meme ^^.

 

ben j'ai plus cas attendre mon 111D qui arrive normalement mercredi, pour graver Eneable08000 .

 

d'ailleut si on le grave sur CD normal sa marche aussi ou pas ?

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
  • Statistiques des membres

    23 028
    Total des membres
    1 033
    Maximum en ligne
    Subaru
    Membre le plus récent
    Subaru
    Inscription
  • Statistiques des forums

    128,1 k
    Total des sujets
    1,7 M
    Total des messages
×
×
  • Créer...