Problêmes de lecture

[Invité bitonio6]

Il est sympa ce poseur de puce quand même!

[Invité Mac Gyver]

Bonjour,

 

Acheté par correspondance a des inconnus ces risqué..

Sinon, je peux te faire un devis réparation pour te dire ce qu'elle a excactement.

Mais avant toute chose, il faut voir si ta puce fonctionne correctement et pour ceci il faut savoir la faire fonctionner.

 

Voici le mod de fonctionnement de ta puce :

 

" Sur la Team Officiel Je Précise"

 

" PS2 games

 

Method 1:

-Press EJECT button to switch on the machine.

-Insert PS2 game in tray.

-Tap RESET button once, the machine would reboot and then load your game.

 

Method 2:

- Press EJECT button to switch on the machine.

- Insert PS2 game in tray, the press EJECT button to close tray.

- The disc will then take 2-5 seconds to be recognized and then boot.

 

To boot another game when already playing a game.

- Press EJECT button.

- The current game would then pause and the tray would come out.

- Change to another PS2 game disc and tap RESET button once.

- The machine would reboot and then load your game.

 

PSX games

 

- Press EJECT button to switch on the machine.

- Insert PSX game in tray, then press and hold RESET button to switch off machine.

- Now hold the RESET button to start up your machine. Only release the RESET button once the Blue LED light of the Eject button lights up.

 

DVD movies

 

- Press EJECT button to switch on the machine.

- Insert DVD movie in tray, then press and hold RESET button to switch off machine.

- Now hold the RESET button to start up your machine. Only release the RESET button until the "blue clouds" comes up on the TV.

 

Disable Mode

 

- Hold the RESET button until the "blue clouds" comes up on the TV.

 

Additional information

 

V9 and v10 LA chip syndrome.

It is a well documented fact that the latest v9 and v10 machines suffer from a major problem. The LA chip has a tendency to die. After it dies, the only solution to get your machine working again is to replace the chip with an original LA6508 or a device called LA6508 RII. However, in both cases, it is quite a hard soldering job. (much harder than to install a chip). The following can be done to reduce the chances of the LA 6508 chip dying. Again do not attempt the simple modification unless you know what you are doing. "

 

Peut être un problème due a ta méthode de boot...

[Belmorgha]

La méthode de boot ne marche pas, désèsperant :/