probleme graveur dans boitier ext. USB 2.0

[Invité Invité]

Voila le probleme, c'est un NEC 2510A 2.16 dans un boitier USB 2.0 + le cable adapté, branché a mon portable.(USB 2.0 OK)

J'avait ce probleme dés l'achat de mon graveur mais je l'avait resolu...

J'avait fait tellement de choses que maintenat je ne me rappele plus ,et de toute facon je n'avait pas compris c'etait quoi la solution...

 

Alors avant tout j'ai desactivé la gravure XP, DMA=on (bon on est en externe USB...)mon graveur est correctement reconu par XP et NERO 6.6.0.0.1.

Alors je lance la gravure d'un .nrg et : "une initialisation est survenue"

"comande SCSI interompue"

"impossible d'effectuer la fonction

Disc At Once"

et ceci juste apres le debut de la preface, voila le Log

 

 

Windows XP 5.1

IA32

WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 08:20:56

ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12

Version de Nero : 6.6.0.1 (Nero Express)

Graveur : Version: 2.16 - HA 2 TA 0 - 6.6.0.1

Pilote d'adaptateur : HA 2

Drive buffer : 2048kB

Bus Type : default (0) -> ATAPI, detected: ?

CD-ROM : Version: JKU5 - HA 1 TA 0 - 6.6.0.1

Pilote d'adaptateur : HA 1

 

=== Scsi-Device-Map ===

DiskPeripheral : ST94011A atapi Port 0 ID 0 DMA: On

CdRomPeripheral : Slimtype COMBO LSC-24082K atapi Port 1 ID 0 DMA: On

 

=== CDRom-Device-Map ===

Slimtype COMBO LSC-24082 D: CDRom0

_NEC DVD_RW ND-2510A E: CDRom1

=======================

 

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 39845888 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 247MB (253296kB)

Free physical memory: 77MB (79844kB)

Memory in use : 68 %

Uncached PFiles: 0x0

Use Static Write Speed Table: 0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

 

3.11.2004

Graver une image DVD

22:40:10 #1 Text 0 File Reader.cpp, Line 127

Reader running

 

22:40:10 #2 Text 0 File Writer.cpp, Line 122

Writer _NEC DVD_RW ND-2510A running

 

22:40:10 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366

Image was written as DAO.

DAOI:

MediaCatalogNumber = ''

TocType = 0x40

Finalized = 1

First/Last Track = 1 / 1

1: ISRC = ''

Blocksize = 2048

TrackMode = 'TRM_DATA_MODE1'

TrackConfig = 0x00

First/Last Index = 0 / 1

Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1841868800

CUES:

0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)

1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)

2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)

3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=199:49.25 ( 899200)

MTYP: Mediumtype = DVD (old format) (0x1C)

Image file name:

 

22:40:10 #4 Text 0 File Burncd.cpp, Line 3117

Turn on Disque entier, using DVD media

 

22:40:10 #5 Text 0 File DlgWaitCD.cpp, Line 256

Last possible write address on media: 2298495 (510:46.45, 4489MB)

Last address to be written: 899199 (199:49.24, 1756MB)

 

22:40:10 #6 Text 0 File DlgWaitCD.cpp, Line 268

Write in overburning mode: NO

 

22:40:10 #7 Text 0 File DlgWaitCD.cpp, Line 2309

Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R

Disc Manufacturer: MCC 01 - RG20

Disc Application Code: 64, Disc Physical Code: 193

 

22:40:10 #8 Text 0 File DlgWaitCD.cpp, Line 430

>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899200 blocks [_NEC DVD_RW ND-2510A]

--------------------------------------------------------------

 

22:40:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047

Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x40; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1841561600, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_

0 | lead-in | 0 | 0x00 | 0x41

0 | 1 | 0 | 0x00 | 0x41

0 | 1 | 1 | 0x00 | 0x41

899200 | lead-out | 1 | 0x00 | 0x41

 

22:40:10 #11 Phase 24 File dlgbrnst.cpp, Line 1853

Début de mise en cache des fichiers

 

22:40:11 #12 Text 0 File Burncd.cpp, Line 4003

Cache writing successful.

 

22:40:11 #13 Phase 25 File dlgbrnst.cpp, Line 1853

Cache des fichiers terminé

 

22:40:11 #14 Phase 36 File dlgbrnst.cpp, Line 1853

Début de gravure à 2x (2 770 Ko/s)

 

22:40:11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

 

22:40:11 #16 Text 0 File dlgbrnst.cpp, Line 1711

Set remaining time: 11:34,166 (694166ms) -> OK

 

22:40:11 #17 Text 0 File DVDR.cpp, Line 2027

Recording mode: Sequential Recording Mode

 

22:40:11 #18 Text 0 File Mmc.cpp, Line 20673

Set BUFE: Buffer underrun protection -> ON

 

22:40:11 #19 Text 0 File DVDR.cpp, Line 2168

Start write address at LBA 0

DVD high compatibility mode: Yes

 

22:40:11 #20 Text 0 File Cdrdrv.cpp, Line 8281

---- DVD Structure: Physical Format Information (00h) ----

Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 5

Disc Size: 120 mm, Maximum Rate: (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: 26127F h

End Sector Number in Layer 0: 0 h

Data in Burst Cutting Area (BCA) does not exist

Start sector number of the current Border-Out: 2FE10 h

Start sector number of the next Border-In: 2FFA0 h

Media Specific [16..63]:

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

 

22:40:11 #21 Text 0 File DVDR.cpp, Line 5656

Book Type counter: 500, Book Type selected in EEPROM, command version 2

 

22:40:11 #22 SCSI -1066 File Cdrdrv.cpp, Line 1178

SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09C94000

Status: 0x04 (0x01, SCSI_ERR)

HA-Status 0x00 (0x00, OK)

TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00

Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A

0x00 0x00 0x00 0x00 0x24 0x00

 

22:40:11 #23 Text 0 File DVDR.cpp, Line 5656

Book Type counter: 500, Book Type selected in EEPROM, command version 2

 

22:40:11 #24 Text 0 File DVDR.cpp, Line 5656

Book Type counter: 500, Book Type selected in EEPROM, command version 2

 

22:40:11 #25 Text 0 File DVDR.cpp, Line 4877

Drive: _NEC DVD_RW ND-2510A

Book Type request: DVD-ROM

Book Type setting not supported for the loaded disc type

 

22:40:13 #26 Text 0 File Cdrdrv.cpp, Line 1284

22:40:13.109 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later

 

22:40:13 #27 SCSI -500 File Cdrdrv.cpp, Line 1432

SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06CB0000

Status: 0x02 (0x03, SCSI_ABORTED)

HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)

TA-Status 0x00 (0x00, OK)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x26

Sense Qual: 0x02

CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00

Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00

0x00 0x00 0x00 0x00 0x26 0x02

 

22:40:13 #28 CDR -500 File Writer.cpp, Line 311

Commande SCSI interrompue

_NEC DVD_RW ND-2510A\H2 T0

 

22:40:13 #29 Text 0 File ThreadedTransfer.cpp, Line 229

all writers idle, stopping conversion

 

22:40:13 #30 Text 0 File ThreadedTransfer.cpp, Line 223

conversion idle, stopping reader

 

22:40:13 #31 Text 0 File DVDR.cpp, Line 2410

EndDAO: Last written address was -1

 

22:40:13 #32 Text 0 File DVDR.cpp, Line 5656

Book Type counter: 500, Book Type selected in EEPROM, command version 2

 

22:40:13 #33 Text 0 File DVDR.cpp, Line 5656

Book Type counter: 500, Book Type selected in EEPROM, command version 2

 

22:40:13 #34 Text 0 File DVDR.cpp, Line 4877

Drive: _NEC DVD_RW ND-2510A

Book Type request: DVD-ROM

Book Type setting not supported for the loaded disc type

 

22:40:13 #35 Text 0 File dlgbrnst.cpp, Line 1711

Set remaining time: 0:00,000 (0ms) -> OK

 

22:40:13 #36 CDR -1114 File WriterStatus.cpp, Line 167

Une initialisation est survenue

 

22:40:13 #37 TRANSFER -24 File WriterStatus.cpp, Line 167

Impossible d'effectuer la fonction Disc At Once

 

22:40:13 #38 Text 0 File dlgbrnst.cpp, Line 1711

Set remaining time: 0:00,000 (0ms) -> OK

 

22:40:13 #39 Phase 38 File dlgbrnst.cpp, Line 1853

La gravure a échoué à 2x (2 770 Ko/s)

 

 

Existing drivers:

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 07:53:02

File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for src)

 

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

___________

help help ______

port Amilo 2.4GhCeleron

NEC 2510A 2.16

[Invité Invité]

personne n'a trouvé qq chose

[Invité Invité]

Même si c "touffu" il manque des infos.

 

1- Est-ce que ça le fait à chaque gravure : audio, données,.... ?

 

2- Le .nrg que tu veux graver a-t-il était récup sur mumule ou le net ???

 

3- Essaie tout bêtement de graver en TAO ou SAO.

 

[Invité Invité]

"touffu"

??? c'est plus que touffu la!!

 

Normalement ya pas de reglage particulier!! tu di a nero que tu vx graver une image, tu chois, tu choisi la vitesse et c'est bon!!

 

Ke ce soit en interne ou en externe ca marche pareil chez moi!!